Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-113
010 317 IOT Fuser
Detached
Detect Fuser Detached Fuser Connection Error 010-317
Turn off the printer and reseat the
Fuser.
Page 2-189
010 351 IOT Fuser Life
Over
Detect Fuser Life Over Fuser End of Life 010-351
Turn off the printer and replace the
Fuser.
Pressing
OK will reset the counter
due to the use of a new fuser.
* Fault screen with
OK button
-> (Press
OK to counter reset.)
Fuser End of Life
Reset is completed.
Switch off the power and ensure
that you replace the fuser.
Page 2-189
010 397 IOT Fuser Failure Detect Fuser Error Fuser Error 010-397
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Code:xxxxxxxxh
Page 2-189
010 420 IOT Fuser Near
End Warning
Fuser Near End Warning XXXXXXXXXXXXXXXX
Fuser Near End of Life, Replace
Soon
Replace the
Fuser
Assembly.
010 421 IOT Fuser Life Pre
Warning
Detect Fuser Life Warning XXXXXXXXXXXXXXXX
Fuser Near End of Life
Replace the
Fuser
Assembly.
016 338 Wi-Fi Option Error Wi-Fi Driver starting error. Reseat Wi-Fi Option 016-338
Power Off/On the Printer and
contact the administrator if
problem persists after reboot.
Replace the
IP Board.
016 369 UI Panel - ESS
Communication
Fail
Communication Fail with a
UI Panel and ESS F/W.
Control Panel Error 016-369
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Replace the
IP Board.
WorkCentre 6605 Error Code List
Chain Link Error Error Details Control Panel Messages
FIP
location