Xerox Phaser 6600 Service Manual

Error Troubleshooting
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
2-224
+3.3 VDC Power FIP
Step Check Yes No
Possible causative parts:
• Top Harness Assembly (PL18.2.5)
• AC Inlet (PL18.1.31)
• LVPS (PL18.1.34)
• MCU Board (PL18.1.13)
1 Check the connections between the LVPS and the MCU
Board
Check the connection between the LVPS and the MCU Board.
Are P/J501 and P/J29 connected securely?
Go to step 2. Reconnect
P/J501 and P/J29
securely.
2 Check the continuity between the LVPS and the MCU Board
Is each cable of P/J501<=>P/J29 continuous?
Go to step 3. Replace the Top
Harness
Assembly.
3 Check the power from the LVPS (+5 VDC)
Check if the voltage between the LVPS ground and the
P/J501-5 pin is about +3.3 VDC.
Replace the MCU
Board.
Go to step 4.
4Check the power (off/on)
Turn the power off, wait a while, and turn the power on
again.
Does the error still occur?
Go to step 5. Finished.
5 Check the AC power to the LVPS
Is the voltage between the P/J48-1 pin and the P/J48-3 pin
of the LVPS 100 VAC?
Replace the LVPS. Replace the AC
Inlet.

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm