Xerox Phaser 6600 Service Manual

Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
A-3
DRV Drive
DUP Duplex
Duplex 2-sided printing
EA Emulsion Aggregation (Toner)
EEPROM Electrically Erasable Programmable Read-Only Memory
ESD Electrostatic Discharge. A transfer of charge between bodies at
different electrostactic potential.
ESS Image process controller
FCC Federal Communications Commission
FDR Feeder
FPOT First Print Output Time
FRU Field Replaceable Unit
GB Giga Byte
GDI Graphics Device Interface
GND Ground
HARN Harness
HCF High-Capacity Feeder
HDD Hard Disk Drive
HUM Humidity
HV High Voltage
HVPS High-Voltage Power Supply
Hz Hertz (cycles per second)
IDT Intermediate Drum Transfer
IEC International Electrotechnical Commission
I/F Interface
IIT Image Input Terminal - DADF, Scanner
IOT Image Output Terminal - the printer
IP Image Processor
KB Kilo Byte
LAN Local Area Network
LCD Liquid Crystal Display
Acronym Description

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm