General Information
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
1-68
Warm-up Time
FPOT (First Print Output Time)
The time required for the first sheet of paper to exit the printer after clicking OK in the driver.
Input Capacities
Output Properties
Event State transition Warm up time Condition
Power On Power off
to Ready
As few as 12 seconds 20°C/60%RH, Rated voltage.
Power On after seasoning for 3
hours or more.
Wake up from Sleep mode Sleep to Ready As few as 3 seconds. 20°C/60%RH, Rated voltage, Plain
paper job in Deep Sleep Mode
shift and 1 hour.
Wake up from
Deep Sleep mode
Deep sleep
to Ready
Color
Mode
FPOT
(Ready)
FPOT
(Power Saver/Sleep)
B/W As fast as 9 seconds 30.3 sec. or less (TBD)
Color As fast as 10 seconds 30.3 sec. or less (TBD)
Input Capacity
Cassette Tray 550 sheets or under 59.4mm of standard paper
Bypass Tray 150 sheets or under 15mm of standard paper
Paper delivery system: Face up delivery
Paper delivery capacity: 250 sheets (Letter/A4 standard paper)
Delivery paper size/mass: All paper sizes applicable to this printer
Full stack detection: There is a sensor to detect a full stack.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
