Xerox Phaser 6600 Service Manual

General Information
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
1-73
Wireless
Wireless Adapter is required.
Note: Connection to the Linux machine is not guaranteed. Only for infrastructure connection and
when Linux terminal is connected with Wired LAN connection.
Item Specification
Conectivity Technology Wireless
Compliant Standards IEEE802.11 n/g/b
Band width 2.4GHz
Data Transfer Rate IEEE802.11n mode: 65 Mbps
IEEE802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE802.11b mode: 11, 5.5, 2, 1 Mbps
Protocol See “Network Protocol” for details
Device Type Wireless Adapter
Security Protocol 64(40-bit key)/128(104-bit key)
WEP,WPA-PSK(TKIP,AES), WPA2-PSK(AES),
WPA-Enterprise(TKIP,AES), WPA2-Enterprise(AES)
(EAP method supports PEAPv0 only)
Wifi Protected Setup (WPS) Push Button Configuration (PBC), Personal Identification Number (PIN)

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm