Xerox WorkCentre 5230A - Page 197

Properties
197
Connectivity Protocols
(continued)
LDAP (continued)
- Password: Enter the password for the search login
name using up to 32 characters. If the server does
not require authentication, or a password is not
required upon authentication, leave this text box
blank.
- Retype Password: Re-enter the password for
verification.
- Maximum Number of Search Results: Specify the
maximum number of search result entries.
- Search Time-Out: Specify whether the server
timeout limit will be used, or how many seconds
the search should last.
- LDAP Referrals: Allows you to enable or disable
LDAP referrals.
- LDAP Referral Hop Limit: Specify the referral hop
limit from 1 to 5.
• Search Name Order:
- Search Name Order: Specify the attribute for
searching by name. [Common Name] will return
matches for the first name and last name of the
individual being searched. [Surname] will return
matches for the last name of the individual being
searched. [Given Name] will return matches for the
first name of the individual being searched.
LDAP User Mappings
• Server Information:
- IP Address/Host Name & Port: Displays the
primary LDAP server IP address and port number.
- LDAP Server: Displays the directory application to
use. This is a display-only item.
- Backup IP Address/Host Name & Port: Displays
the secondary LDAP server IP address and port
number.
- Search Directory Root: Displays the distinguished
name that represents the search start point.
• Search:
- Properties: Displays “Imported Heading”. This is a
display-only item.
- Common Name: Specify the name attribute type.
- E-mail Address: Specify the e-mail address
attribute type.
- Business Phone: Specify the business phone
attribute type.
- Office: Specify the office attribute type.
- Business Address: Specify the business address
attribute type.
- Home: Specify the home attribute type.
LDAP Authentication
• LDAP Authentication:
- Authentication Method: Specify the LDAP
authentication method.
Feature Setting items