August 2015
5-15
Xerox® WorkCentre® 5890 Family
PL 10.10
Parts Lists
PL 10.10 Fuser Module (65-90 ppm)
Item Part Description
1
109R00772 Fuser module (XE) (NOTE 1)
– 109R00773 Fuser module (USSG/XCL) (NOTE
1)
2 – Web drive dog (Not Spared)
3 – Spring (P/O PL 10.10 Item 1)
4 – Fuser stripper finger kit (REF: PL
31.13 Item 19)
5 – Fuser latch (P/O PL 10.10 Item 10)
(REP 10.10)
6 – Fuser latch pin (P/O PL 10.10 Item
10)
7 – Spring (P/O PL 10.10 Item 10)
8 – Latch stop (P/O PL 10.10 Item 10)
9 – Screw (P/O PL 10.10 Item 10)
10 – Fuser latch pin kit (REF: PL 31.13
Item 2) (REP 10.10)
11 110K20910 Fuser exit switch (S10-100) (REP
10.16)
12 – Fuser upper exit guide (P/O PL
10.10 Item 1)
13 – Fuser top cover (P/O PL 10.10 Item
1)
14 – Lower input guide (Not Spared)
15 – Lamp (P/O PL 10.10 Item 1)
NOTE: 1. An ozone filter, PL 90.25 Item 3 is supplied with the
fuser module.
NOTE: 2. For the fuser web motor, fuser connector assembly
and fuser CRUM connector, refer to PL 40.10.
To Next Page
Loading...
