Xerox WorkCentre 6505 User Manual

Copying
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
104
Image Adjustments
You can modify the following image adjustment settings:
• Reducing or Enlarging the Image on page 104
• Making the Image Lighter or Darker on page 104
• Adjusting the Sharpness on page 104
• Adjusting the Color Saturation on page 105
• Setting Auto Exposure on page 105
Reducing or Enlarging the Image
You can reduce the image to as little as 50% of its original size or enlarge it as much as 400%.
To reduce or enlarge the copied image:
1. Press the Up Arrow or Down Arrow button to select Reduce/Enlarge, then press the OK button.
2. Do one of the following:
•Press the Up Arrow or Down Arrow button to select a preset image size.
•Press the Back Arrow button, then press the Forward Arrow or Back Arrow button to set the
copy size in increments of 1%.
Note: The default setting is 100%.
3. Press OK to confirm the setting.
Making the Image Lighter or Darker
To lighten or darken the copied image:
1. Press the Up Arrow or Down Arrow button to select Lighten/Darken, then press the OK button.
2. Press the Back Arrow or Forward Arrow button to move the slider to lighten or darken the image.
3. Press OK to confirm the setting.
Adjusting the Sharpness
To adjust the sharpness of the copied image:
1. Press the Up Arrow or Down Arrow button to select Sharpness, then press the OK button.
2. Select a sharpness setting:
• Sharper
• Normal
• Softer
Note: The default setting is Normal.
3. Press OK to confirm the setting.

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi