Maintenance
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
166
Cleaning the Printer
This section includes:
• General Precautions on page 166
• Cleaning the Document Glass on page 167
• Cleaning the Exterior on page 167
• Cleaning the Interior on page 168
General Precautions
WARNING: When cleaning your printer do not use organic or strong chemical solvents or aerosol
cleaners. Do not pour fluids directly into any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of children.
WARNING: Internal parts of the printer can be hot, especially the fuser. Use caution when doors
and covers are open.
WARNING: Do not use pressurized air-spray cleaning aids on or in the printer. Some pressurized
air-spray containers contain explosive mixtures and are not suitable for use in electrical
applications. Use of such cleaners can result in a risk of explosion and fire.
WARNING: Do not remove the covers or guards that are fastened with screws. You cannot
maintain or service any parts that are behind these covers and guards. Do not attempt any
maintenance procedure that is not described in the documentation supplied with your printer.
To avoid damaging the printer, follow these guidelines:
• Do not place anything on top of the printer.
• Do not leave the covers and doors open for any length of time, especially in well-lit places. Light
exposure can damage the imaging units.
• Do not open covers and doors during printing.
• Do not tilt the printer while in use.
• Do not touch the electrical contacts, gears, or laser devices. Doing so could damage the printer
and cause the print quality to deteriorate.
• Make sure any parts removed during cleaning are reinstalled before you plug in the printer.
To Next Page
Loading...
Need help?
General
