Xerox WorkCentre 6505

Faxing
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
137
Selecting Fax Options for Single Jobs
This section includes:
• Setting the Fax Resolution on page 137
• Making the Image Lighter or Darker on page 137
• Turning On Hook On or Off on page 137
• Sending a Delayed Fax on page 138
• Including a Fax Cover Page on page 138
• Setting Up Polling on page 138
Setting the Fax Resolution
To set the fax resolution:
1. On the control panel, press the Fax button.
2. Press the Up Arrow or Down Arrow button to select Resolution, then press the OK button.
3. Select an option from the drop-down list:
• Standard
• Fine
• Super Fine
• Photo
Note: The default setting is Standard.
4. Press OK.
Making the Image Lighter or Darker
To lighten or darken an image when it is faxed:
1. On the control panel, press the Fax button.
2. Press the Up Arrow or Down Arrow button to select Lighten/Darken, then press the OK button.
3. Press the Forward Arrow or Back Arrow button to move the slider and lighten or darken the fax.
Note: The default setting is Normal.
4. Press OK.
Turning On Hook On or Off
When you turn on the On Hook option, the telephone line is ready to dial out when you enter a phone
number. You cannot receive incoming faxes while On Hook is turned on.
To turn On Hook on or off:
1. On the control panel, press the Fax button.
2. Press the Up Arrow or Down Arrow button to select On Hook, then press the OK button.