Xerox WorkCentre 6505 User Manual

Installation and Setup
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
28
Installation and Setup Overview
Before using the printer, you must:
1. Make sure that the printer is set up correctly in an appropriate location. For details, see Selecting a
Location for the Printer on page 29.
2. Select a connection method. For details, see Choosing a Connection Method on page 30.
3. Make sure that the printer is connected correctly. For details, see Connecting the Printer on
page 30.
4. Turn on the printer and the computer. The Startup Page prints by default. If it does not, see
Startup Page on page 24. If you are connected to a network, keep the Startup Page for referencing
network settings such as the IP address of your printer.
5. If connected to a network, configure network settings. For details, see Configuring Network
Settings on page 32.
6. Install drivers and software utilities from the Software and Documentation disc. The software
installation procedure depends on your connection type (network or USB). For details, see
Installing the Software on page 38.
7. Enable optional features and configure software.
Note: If the Software and Documentation disc is not available, you can download the latest
drivers from www.xerox.com/office/WC6505drivers.

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi