Xerox WorkCentre 6505 User Manual

Printing
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
65
Loading Paper in the 250-Sheet Feeder (Tray 2)
You can use the 250-sheet feeder for the following types of paper:
• Plain paper
•Letterhead
•Hole Punched
•Colored Paper
For supported paper sizes and weights, see Supported Paper on page 58.
Follow these guidelines to avoid problems during printing:
• Do not load different types of paper in the tray at the same time.
• To print high quality, use high-quality paper intended for laser printers.
• Do not remove or add paper to the 250-sheet feeder during printing. Doing so can cause a paper
jam. Remove the paper, align it with the new paper, and insert both into the tray together.
• Do not put any objects other than paper in the tray.
• Do not push or force down the tray.
• Always load paper short-edge feed first.
CAUTION: Do not remove the tray during printing because it can cause a paper jam.
To load paper in the 250-sheet feeder:
1. Gently pull the paper tray out of the printer.
wc6505_049

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi