Xerox WorkCentre 6505 User Manual

Printing
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
63
4. Insert all paper face up, with the top edge at the front of the paper tray.
Notes:
• Do not force the paper into the tray.
• Be careful not to bend the paper.
5. Slide the paper width guides until they rest lightly against the edge of the paper stack.
6. Insert the tray back into the printer until it stops.
CAUTION: Be careful not to use excessive force on the tray. Doing so could damage the printer.
See also:
Setting Paper Types and Sizes on page 68
Loading Paper in the Manual Feed Slot
Use the manual feed slot for a wide range of media including:
• Plain Paper
•Letterhead
• Lightweight Cardstock
• Heavyweight Cardstock
• Lightweight Glossy Cardstock (Coated 2 and Coated 3)
• Heavyweight Glossy Cardstock
•Colored Paper
•Labels
•Envelopes
•Special
For a more complete list of paper types and sizes usable in the Manual Feed Slot, see Supported Paper
on page 58.
Follow these guidelines to avoid problems during printing:
• Use several sheets of the paper only when adjusting the paper width guides.
• Holding the paper on both sides, slowly and evenly insert the paper into the printer.
• If the paper looks skewed after the printer pulls it in, gently remove the paper and reseat it. Then
press the OK button or wait for the automatic calibration to start.
wc6505_010

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi