Xerox WorkCentre 6505 User Manual

Maintenance
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
168
Cleaning the Interior
After clearing paper jams or replacing one of the toner cartridges, inspect the inside of the printer
before closing the printer covers.
Remove any remaining pieces of paper. For more information, see Clearing Paper Jams on page 205.
Remove any dust or stains with a dry, clean cloth.
WARNING: Never touch a labeled area found on or near the heat roller in the fuser. You can get
burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it immediately
to avoid injuries or burns. Switch off the printer immediately and wait 40 minutes for the fuser
to cool.
wc6505_037
1
2
1. Fuser
2. Transfer belt unit

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi