Xerox WorkCentre 6505 User Manual

Troubleshooting
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
203
Color Balance
The printer automatically rebalances the color when printer consumables are replaced, or when
changes in environmental conditions occur. To performance this manually one time, use the following
procedure.
To adjust the color balance for the printer:
1. On the control panel, press the System button.
2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.
3. Press the Up Arrow or Down Arrow button to select Maintenance, then press OK.
4. Press the Up Arrow or Down Arrow button to select Drum Refresh, then press OK.
5. At the Are you sure? prompt, press OK.
The process runs automatically. Wait about three minutes for the process to complete and the
printer to return to Ready.

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi