Xerox WorkCentre 6505

Faxing
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
139
Changing the Default Fax Job Settings
To change the default fax settings:
1. On the control panel, press the System button.
2. Press the Up Arrow or Down Arrow button to select Default Settings, then press the OK button.
3. Select Fax Defaults, then press OK.
4. Press the Up Arrow or Down Arrow button to select the setting you want to change, then press
OK.
5. Press the Up Arrow or Down Arrow button to select the new setting, then press OK.
Fax Configuration
To configure the printer for faxing:
1. On the control panel, press the System button.
2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.
3. If prompted, enter the password, then press OK.
4. Select Fax Settings, then press OK.
5. Edit the fax settings as desired.
6. Press OK.
For information on the Fax Settings menu items, see Fax Settings on page 153.