Regulatory Information
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
226
For user protection, make sure that the printer is properly grounded. The electrical ground connections
of the power utility, telephone lines, and internal metallic water pipe systems, if present, must be
connected together. This precaution could be vital in rural areas.
WARNING: Do not attempt to make such connections yourself. Contact the appropriate electric
inspection authority, or electrician, to make the ground connection.
The REN assigned to each terminal device provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface could consist of any
combination of devices. The only limitation to the number of devices is the requirement that the sum
of the RENs of the devices does not exceed 5. For the Canadian REN value, please see the label on the
equipment.
European Union
Radio Equipment & Telecommunications Terminal Equipment Directive
The Facsimile has been approved in accordance with the Council Decision 1999/5/EC for pan-European
single terminal connection to the public switched telephone network (PSTN). However, due to
differences between the individual PSTNs provided in different countries, the approval does not give an
unconditional assurance of successful operation on every PSTN network terminal point.
In the event of a problem you should contact your authorized local dealer.
This product has been tested to and is compliant with ES 203 021-1, -2, -3, a specification for terminal
equipment for use on analog-switched telephone networks in the European Economic Area. This
product provides a user-adjustable setting of the country code. The country code should be set prior to
connecting this product to the network. Refer to the customer documentation for the procedure for
setting the country code.
Note: Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling, it is
recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call
setup. Modification of this product, connection to external control software or to external control
apparatus not authorized by Xerox
®
, will invalidate its certification.
South African Statement
This modem must be used in conjunction with an approved surge protection device.
To Next Page
Loading...
Need help?
General
