Xerox WorkCentre 6505 User Manual

Control Panel Menus
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
164
When the size or type of paper that is loaded is different from the setting, print quality can be reduced
or paper jams can occur. Specify the correct paper type and size.
When the paper size and type settings for the trays are the same, printing is uninterrupted when the
paper runs out in the specified tray. Printing continues by changing to the other tray when it is
installed.
Item Description
Paper Size
Specifies the paper size and orientation for each tray.
• Manual Feed Slot
• Paper Tray. The default setting is Auto.
For details, see Supported Paper on page 58, and Setting Paper Types and Sizes on page 68.
Paper Type
Specifies the type of paper loaded in each tray.
• Manual Feed Slot. The default setting is Thin Card Stock.
• Paper Tray. The default setting is Plain.
For details, see Supported Paper on page 58, and Setting Paper Types and Sizes on page 68.
Display Popup
Specifies whether to display the message that prompts you to set the paper size and type
every time you load paper in the tray. The default setting is Off.

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi