Xerox WorkCentre 6505 User Manual

Maintenance
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
179
When moving the printer:
• Always use two people to lift and move the printer.
• When lifting the printer, grasp the areas as shown in the illustration.
• Do not tilt the printer more than 10 degrees to the front or back, or left or right. Tilting the printer
more than 10 degrees can cause toner spillage.
CAUTION: Failure to repackage the printer properly can result in damage to the printer not
covered by the Warranty, Service Agreement, or Total Satisfaction Guarantee.
After moving the printer:
1. Reinstall any parts you removed. If you removed the 250-sheet feeder, put the printer back on top
of it.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
4. Adjust the color registration before using the printer. For details, see Color Registration on
page 199.
wc6505_002
30 kg
66.1 lb.
Note: Configured with
the optional duplex unit
and 250-sheet feeder,
the printer weighs
34.5 Kg (76 lb.). Do not
move them together.
Move the Tray 2
assembly and the
printer separately.

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi