Printing
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
79
Printing Envelopes from the Manual Feed Slot
Note: You can load only one envelope at a time in the manual feed slot.
To load an envelope:
1. Slide the paper guides of the manual feed slot to fit the envelopes you are using. For details, see
Loading Paper in the Manual Feed Slot on page 63.
2. Insert one envelope with the flaps closed, flaps up, and flaps to the right as shown in the
illustration.
3. Slide the paper guides so they rest lightly against the edge of the envelope.
4. Do one of the following:
• If you are printing using the PostScript driver, go to Printing Envelopes using the PostScript
Driver on page 79.
• If you are printing using the PCL driver, go to Printing Envelopes using the PCL Driver on
page 79.
Printing Envelopes using the PostScript Driver
1. After loading the envelopes in the appropriate tray or the manual feed slot, in the application you
are printing from, open the Print dialog box.
2. Select the WorkCentre 6505 PS printer from the list of printers, then click the Properties or
Preferences button.
3. On the Paper/Output tab, do the following:
a. From the Paper Size list, select the envelope size.
b. From the Paper Type list, select Envelope.
c. From the Paper Tray list, select the tray you are using.
4. Click OK.
5. In the Print dialog box, click OK or Print to start printing.
Printing Envelopes using the PCL Driver
1. After loading the envelopes in the appropriate tray, in the application you are printing from, open
the Print dialog box.
To Next Page
Loading...
Need help?
General
