Xerox WorkCentre PE220 User Manual

7Faxing
Xerox PE220 7-5
Sending a Fax
Loading a Document
You can use the Automatic Document Feeder (ADF) or the document glass to
load an original document for faxing. Using the ADF, you can load up to 30
sheets of 20 lb (75 g/m
2
bond) paper at a time. You can, of course, place only
one sheet at a time on the document glass. For details about preparing a
document, see Making Copies on page 4-2.
To fax a document using the Automatic Document
Feeder (ADF):
1. Load the document face up into the ADF. You can insert up to 30 sheets
at a time.
Make sure that the bottom of
the document stack matches
the paper size marked on the
document tray.
2. Adjust the document guide on
the ADF to match the width of
the document.
NOTE: Dust on the ADF glass
may cause black lines on the
printout. Use the recommend
materials to keep the ADF glass
clean. Refer to Cleaning the Scan
Unit on page 8-5.

Xerox WorkCentre PE220 Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Connectivity	USB 2.0
Functions	Print, Copy, Scan, Fax
Grayscale Depth	8-bit
Standard Media Capacity	250 sheets
PC Connection	USB 2.0
Scan Resolution	600 x 600 dpi
Color Depth	24-bit
Media Size Class	A4
Max Media Size	8.5 x 14 inches
Supported Media Type	Envelopes, Transparencies, plain paper
Supported Operating Systems	Windows, Mac OS
Print Speed	Up to 22 ppm