2 Getting Started
Xerox PE220 2-19
For the ringer volume, you can select “Off”, “Low”, “Med”, and “High”.
Setting “Off” means that the ringer does not sound. The machine works
normally even if the ringer is turned off.
4. Press Enter to save the selection. The next sound option appears.
5. If necessary, repeat steps 2 through 4.
6. To return to Standby mode, press Stop/Clear.
Speaker Volume
1. Press Manual Dial. A dial tone sounds from the speaker.
2. Press the scroll button ( or ) until you hear the volume you want. The
display shows the current volume level.
3. Press Manual Dial to save the change and return to Standby mode.
NOTE: You can adjust the speaker volume only when the telephone line is
connected.
To Next Page
Loading...
