Xilinx KCU116 - Status and User Leds

KCU116 Board User Guide 57
UG1239 (v1.2) September 28, 2018 www.xilinx.com
Chapter3: Board Component Descriptions
Status and User LEDs
[Figure 2-1, callout 22]
Table 3-19 defines KCU116 board status and user LEDs.
Table3‐19: KCU116 Board Status and User LEDs
Reference Designator Description
DS1 INIT
DS2 12V On
DS3 VCCAUX_PGOOD
DS4 VCC3V3_PGOOD
DS5 VCCINT_PGOOD
DS6 VADJ_FMC_PGOOD
DS7 VCC1V2_PGOOD
DS8 VCCBRAM_PGOOD
DS9 MGTAVTT_PGOOD
DS10 MGTAVCC_PGOOD
DS11 ENET PHY Link Established
DS12 SYS_5V0 On
DS21 VCC1V8_PGOOD
DS22 UTIL_5V0_PGOOD
DS25 UTIL_3V3_PGOOD
DS26 MGTVCCAUX_PGOOD
DS30 PL_DDR4_VTERM_0V60_PGOOD
DS32 Done
DS37 GPIO_LED_1
DS38 GPIO_LED_0
DS39 GPIO_LED_2
DS40 GPIO_LED_5
DS41 GPIO_LED_4
DS42 GPIO_LED_5
DS43 GPIO_LED_6
DS44 GPIO_LED_7
DS50 SYSCTLR INIT
DS51 SYSCTLR Status
DS52 SYSCTLR Done
DS53 SYS_2V5 On
Send Feedback