Yamaha F100B - Removing the Power Unit

60C5D11
5-10
1
2
3
4
5
6
7
8
9
Removing the power unit
1. Remove the flywheel magnet cover and
flywheel magnet.
CAUTION:
• Before removing the power unit, discon-
nect the battery terminals.
• Apply force in the direction of the
arrows shown, to prevent the flywheel
holder from slipping off easily.
• To prevent damage to the engine or
tools, screw in the flywheel puller set
bolts evenly and completely so that the
flywheel puller plate is parallel to the fly-
wheel magnet.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
2. Remove the retaining plate
1
and clamp
2
, and then disconnect the throttle cable
3
and shift cable
4
. Remove the grom-
met
5
and disconnect the fuel hose
6
.
Flywheel holder
1
: 90890-06522
Flywheel puller
2
: 90890-06521
S60C5090
Power unit