TRBL
SHTG
Troubleshooting
9-1
62Y5A11
NOTE:
• To diagnose a mechanical malfunction, use the troubleshooting charts pertaining to the trouble
located in this chapter. Also, when checking and maintaining the outboard motor, see Chapters 4–
8, to check the part necessary to carry out safety maintenance.
• Check that all electrical connections are tight and free from corrosion, and that the battery is fully
charged to 12 V.
Power unit
9
Symptom: Engine does not crank.
• Check the starting system.
• Check the power unit.
Check that the gearshift is in the
neutral position.
Check the neutral switch for
continuity.
Check the engine start switch
for continuity.
Check the engine shut-off
switch for continuity.
Is the gearshift
in neutral?
Is there conti-
nuity?
Is there conti-
nuity?
Set it to the neutral position.
Replace the neutral switch.
Replace the engine start switch.
Yes
Yes
Yes
No
No
No
Continued on next page.
To Next Page
Loading...
