Yamaha F100B - Page 59

60C5D11
3-6
1
2
3
4
5
6
7
8
9
NOTE:
To extract and change the oil through the dip-
stick hole
a
, you can use an oil changer
3
like the one shown in the illustration.
3. Place a rag under the oil filter, and then
remove the filter.
NOTE:
Be sure to clean up any oil spills.
4. Apply a thin coat of engine oil to the O-
ring of the new oil filter.
5. Install the oil filter, and then tighten it to
the specified torque.
6. Install the drain bolt, and then tighten it to
the specified torque.
Oil filter wrench: 90890-01426
S60C3080
Oil filter wrench: 90890-01426
T
R
.
.
Oil filter: 18 N·m (1.8 kgf·m, 13 ft·lb)
T
R
.
.
Drain bolt:
28 N·m (2.8 kgf·m, 20 ft·lb)
S60C3090
E
S60C3100
Fuel system / Power unit