4. Disassembly and reassembly
151
(22) Removing the marine gearbox
Loosen the bolts for the clutch case flange,
and remove the gearbox assembly
(23) Removing the flywheel
Loosen the flywheel bolts and remove the
flywheel.
Note:
Be careful not to scratch the ring gear.
(24) Turning the engine over
1) Place a wood block of appropriate size on the
floor, and stand up the engine on the flywheel
housing.
2) Remove the engine mounting feet.
(25) Removing the crankshaft V-pulley
Loosen the bolt tightening the crankshaft V-
pulley and remove the crankshaft V-pulley
with an extraction tool.
(26) Removing the oil pan
Remove the oil pan and spacer.
Flywheel
Flywheel housing
010438-00E
010439-00X
Crankshaft V-pully
010440-00E
To Next Page
Loading...
