YASKAWA GA500 - D: Reference Settings; D1: Frequency Reference

Parameter List
3
3.7 d: Reference Settings
YASKAWA TOEPYAIGA5001A GA500 DRIVE MAINTENANCE & TROUBLESHOOTING 111
3.7 d: Reference Settings
◆ d1: Frequency Reference
No.
(Hex.)
Name Description
Default
(Range)
d1-01
(0280)
RUN
Reference 1 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-02
(0281)
RUN
Reference 2 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-03
(0282)
RUN
Reference 3 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-04
(0283)
RUN
Reference 4 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-05
(0284)
RUN
Reference 5 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-06
(0285)
RUN
Reference 6 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-07
(0286)
RUN
Reference 7 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-08
(0287)
RUN
Reference 8 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-09
(0288)
RUN
Reference 9 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-10
(028B)
RUN
Reference 10 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-11
(028C)
RUN
Reference 11 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-12
(028D)
RUN
Reference 12 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-13
(028E)
RUN
Reference 13 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)
d1-14
(028F)
RUN
Reference 14 Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection].
Note:
When A1-02 = 6 [Control Method Selection = AOLV/PM], the default setting is o1-03 = 1
[0.01% (100% = E1-04)].
0.00 Hz
(0.00 - 590.00 Hz)