YASKAWA GA500 - A2: User Parameters

3.4 A: Initialization Parameters
96 YASKAWA TOEPYAIGA5001A GA500 DRIVE MAINTENANCE & TROUBLESHOOTING
◆ A2: User Parameters
No.
(Hex.)
Name Description
Default
(Setting Range)
A2-01
(0106)
User Parameter 1 Sets the parameter number to show on the first line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
A1-02
(Determined by A1-06)
A2-02
(0107)
User Parameter 2 Sets the parameter number to show on the second line in Setup Mode. You can select a maximum of
32 parameters for the drive and set them to parameters A2-01 to A2-32.
b1-01
(Determined by A1-06)
A2-03
(0108)
User Parameter 3 Sets the parameter number to show on the third line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
b1-02
(Determined by A1-06)
A2-04
(0109)
User Parameter 4 Sets the parameter number to show on the fourth line in Setup Mode. You can select a maximum of
32 parameters for the drive and set them to parameters A2-01 to A2-32.
b1-03
(Determined by A1-06)
A2-05
(010A)
User Parameter 5 Sets the parameter number to show on the fifth line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
C1-01
(Determined by A1-06)
A2-06
(010B)
User Parameter 6 Sets the parameter number to show on the sixth line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
C1-02
(Determined by A1-06)
A2-07
(010C)
User Parameter 7 Sets the parameter number to show on the seventh line in Setup Mode. You can select a maximum of
32 parameters for the drive and set them to parameters A2-01 to A2-32.
C6-01
(Determined by A1-06)
A2-08
(010D)
User Parameter 8 Sets the parameter number to show on the eighth line in Setup Mode. You can select a maximum of
32 parameters for the drive and set them to parameters A2-01 to A2-32.
C6-02
(Determined by A1-06)
A2-09
(010E)
User Parameter 9 Sets the parameter number to show on the ninth line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
d1-01
(Determined by A1-06)
A2-10
(010F)
User Parameter 10 Sets the parameter number to show on the 10th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
d1-02
(Determined by A1-06)
A2-11
(0110)
User Parameter 11 Sets the parameter number to show on the 11th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
d1-03
(Determined by A1-06)
A2-12
(0111)
User Parameter 12 Sets the parameter number to show on the 12th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
d1-04
(Determined by A1-06)
A2-13
(0112)
User Parameter 13 Sets the parameter number to show on the 13th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
d1-17
(Determined by A1-06)
A2-14
(0113)
User Parameter 14 Sets the parameter number to show on the 14th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E1-01
(Determined by A1-06)
A2-15
(0114)
User Parameter 15 Sets the parameter number to show on the 15th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E1-03
(Determined by A1-06)
A2-16
(0115)
User Parameter 16 Sets the parameter number to show on the 16th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E1-04
(Determined by A1-06)
A2-17
(0116)
User Parameter 17 Sets the parameter number to show on the 17th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E1-05
(Determined by A1-06)
A2-18
(0117)
User Parameter 18 Sets the parameter number to show on the 18th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E1-06
(Determined by A1-06)
A2-19
(0118)
User Parameter 19 Sets the parameter number to show on the 19th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E1-09
(Determined by A1-06)
A2-20
(0119)
User Parameter 20 Sets the parameter number to show on the 20th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E1-13
(Determined by A1-06)
A2-21
(011A)
User Parameter 21 Sets the parameter number to show on the 21st line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E2-01
(Determined by A1-06)
A2-22
(011B)
User Parameter 22 Sets the parameter number to show on the 22nd line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E2-04
(Determined by A1-06)
A2-23
(011C)
User Parameter 23 Sets the parameter number to show on the 23rd line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
E2-11
(Determined by A1-06)
A2-24
(011D)
User Parameter 24 Sets the parameter number to show on the 24th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
H4-02
(Determined by A1-06)
A2-25
(011E)
User Parameter 25 Sets the parameter number to show on the 25th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
L1-01
(Determined by A1-06)
A2-26
(011F)
User Parameter 26 Sets the parameter number to show on the 26th line in Setup Mode. You can select a maximum of 32
parameters for the drive and set them to parameters A2-01 to A2-32.
L3-04
(Determined by A1-06)