4
System Startup and Sample Programs
4.1.4
Setting and Saving Communication Process (Communication Manager)
4-8
■
Settings for Ethernet Connection
Prior to make settings for Ethernet connection, the IP adderss of the personal computer must be set. Use the following
procedure to set the IP address and make settings for Ethernet connection.
Make the following settings with the LAN cable connected.
7.
Click Start - Settings - Control Panel - Internet Options.
The Internet Properties Window appears.
8.
Click Connection Tab to display the page. Click LAN settngs.
The Local Area Network (LAN) Settings Dialog Box appears.
9.
Check if the Automatically detect the settings Check Box is cleared and click the OK Button to close
the dialog box.
10.
For a computer running Windows 2000 OS, click the Start Button and select Settings - Control Panel
- Network and dial-up connection.
For a computer running Windows XP OS, click the Start Button and select Settings - Control Panel -
Network connection.
On the computer running Windows 2000 OS, the Network and dial-up conneciton Window will be displayed,
and on the computer running Windows XP OS, the Network connection Window.
To Next Page
Loading...
