4
System Startup and Sample Programs
4.2.1
Copying and Transferring Sample Program Files
4-14
3.
Open the Sample folder, and then open the ENG folder inside the Sample folder to display the sample
program files.
4.
Copy the sample program file 2300SMPL_E.YMW, and paste it in a folder in the hard disk.
( 2 ) Starting MPE720 Ver 6.
To Transfer the Sample Program to the MP2300
1.
Double-click the 2300SMPL_E.YMW file copied to the hard disk.
MPE720 Ver 6.
will start up and the following message will ask for confirmation to connect to the controller.
Click the No Button.
2.
Click Communications Setting in the MPE720 Ver 6.
main window.
The Communications Setting Dialog Box will appear.
To Next Page
Loading...
