1.7 H: Terminal Functions
168 YASKAWA ELECTRIC SIEP C710606 10A YASKAWA AC Drive - V1000 PRELIM. Programming Manual
Setting 1A: During Reverse
The During Reverse digital output will close whenever the drive is turning the motor in the
reverse direction.
Figure 1.63
Figure 1.63 Reverse Direction Output Example Timechart
Setting 1B: During Baseblock (N.C.)
Output opens to indicate that the drive is in a baseblock state. While Baseblock is executed,
output transistors are not switched and no voltage is output.
Setting 1C: Motor 2 Selected
This output function shows the motor 1/2 selection status. Refer to Setting 16: Motor 2
Selection on page 148 for details on switching motors.
Status Description
Open Motor is driven in the forward direction or stopped.
Closed Motor is driven in reverse.
Status Description
Open Baseblock is being executed.
Closed Drive is not in a baseblock state.
Output frequency
time
FWD Run command
REV Run command
During Reverse
OFF
ON
To Next Page
Loading...
