YASKAWA SGM-A3

SERVO SELECTION AND DATA SHEETS
5.4.2 Servomotor Dimensional Drawings cont.
292
Note 1) The detector uses an incremental encoder 2048 P/R.
2) Type “V” indicates 200 V specification, and type “W” indicates 100 V specification.
3) “02V(W)314”, “02V(W)316”, “03W314”, “03W316”, “04V314” and “04V316” have a
keyed shaft. The keyway complies with JIS B 1301-1976 (precision). A straight key is
supplied.
4) The quoted allowable radial load is the value at a position 25 mm (0.98 in.) from the mo-
tor mounting surface.
• 750 W (1.01 HP)
(0.67)
Encoder Lead
UL2854
Incremental Encoder
2048 P/R
Cross-section Y-Y
(1.34)
4-φ7(φ0.28)
MTG Holes
Motor Lead φ7
(φ0.29)
Sealant
(0.0016)
(0.0008)
(7.28)
(1.38)
(11.81¦1.18)
(1.38)
(0.12)
(1.57)
(11.81¦1.18)
φ16
0
-0.011
0.63
-0.0004
0
φ
(
)
(0.31)
(0.31)
(3.15)
(φ0.55)
(0.20)
Marked Wire
Sealant
(φ0.0016)
Sealant
φ70
0
-0.030
2.76
-0.0012
0
φ
(
)
(5.71)
(4.37)
(0.59)
(0.83)
Shaft end screw hole
(SGM−08V316,
with key type only)
Screw
Type
SGM-
QK U W T Screw
dimen-
sions
Output
W
(HP)
Approx.
mass
kg
(lb)
Allowable
radial
load
N (lb)
Allowable
thrust
load
N (lb)
08V312 No key
−
750
(1 01)
3.4
(0)
392 (88.1) 147 (33.0)
08V314
30
(1 18)
3
(0 12)
5
(0 20)
5
(0 20)
(1.01) (7.50)
(
)
(
)
08V316
(1.18) (0.12) (0.20) (0.20)
M5,
depth
8(0.31)
Note 1) The detector uses an incremental encoder 2048 P/R.
2) Type “V” indicates 200 V specification.
5