463
Specifi-
cations
90_Dirrerence
Two-phase Pulse
Reference
CCW Pulse + CW PulseStandard Specifications
Memory
Switch
Setting
Cn-02
Bit 5, 4, 3 = 0, 1, 0
(× 1 multiplication)
=0,1,1
(× 2 multiplication)
=1,0,0
(× 4 multiplication)
Cn-02
Bit 5, 4, 3 = 0, 0, 1
Standard Setting
(Cn-02 Bit B = 1)
42 P-OT
Forward rotation prohibited
3.1.2
43 N-OT
Reverse rotation prohibited
3.1.2
44 ALM-RST
Alarm reset input
3.7.1
45 P-CL
Forward torque limit ON input
3.1.3
46 N-CL
Reverse torque limit ON input
3.1.3
47 +24VIN
I/O power supply
3.2.4
48
−
(Unused)
49
−
(Unused)
50 FG
Frame ground
3.2.3
Note
Information described in the “Standard Specifications” column is also applicable to blank col-
umns.
Number “
x.x.x
” represents a section number corresponding to each signal name. For exam-
ple,
3.2.3
represents Section 3.2.3.
C
To Next Page
Loading...
