YASKAWA SGMJV - Fn00 E; Manual Offset-Signal Adjustment of the Motor Current Detection (Fn00 F); Write Prohibited Setting (Fn010)

7 Utility Functions (Fn)
7-20
7.12 Write Prohibited Setting (Fn010)
Prohibiting writing prevents writing parameters by mistake.
This function can write-protect all Pn parameters and the utility functions (Fn ) shown in (1)
Utility Functions That Can Be Write-protected.
(1) Utility Functions That Can Be Write-protected
Note: {: Possible, ×: Impossible
If the write prohibited setting (Fn010) is enabled, the following display will appear on the Panel Operator when the
user attempts to execute the above utility functions. To execute these utility functions, set Fn010 to write permitted
by using the procedure shown in (2) Operating Procedure.
Parameter
No.
Function
Write
Prohibited
Setting
Reference
Section
Fn000 Alarm traceback data display × 7.2
Fn002 JOG operation { 7.3
Fn003 Origin search { 7.4
Fn004 Program JOG operation { 7.5
Fn005 Initialize parameter settings { 7.6
Fn006 Clear alarm traceback data { 7.7
Fn008 Absolute encoder multi-turn reset and encoder alarm reset { 5.9.5
Fn009 Automatic tuning of analog (speed, torque) reference offset {
5.3.2
5.5.2
Fn00A Manual servo tuning of speed reference offset { 5.3.2
Fn00B Manual servo tuning of torque reference offset { 5.5.2
Fn00C Manual zero-adjustment of analog monitor output { 7.8
Fn00D Manual gain-adjustment of analog monitor output { 7.9
Fn00E Automatic offset-adjustment of motor current detection signal { 7.10
Fn00F Manual offset-adjustment of motor current detection signal { 7.11
Fn010 Write prohibited setting − 7.12
Fn011 Checks servomotor models × 7.13
Fn012 Software version display × 7.14
Fn013
Multi-turn limit value setting change when a Multi-turn Limit
Disagreement alarm occurs
{ 5.9.8
Fn014 Resets configuration error of option module { 7.15
Fn01B Initializes vibration detection level { 7.16
Fn01E SERVOPACK and servomotor ID display × 7.17
Fn01F Display of servomotor ID for feedback option × 7.18
Fn020 Origin setting × 7.19
Fn030 So
ftware reset × 7.20
Fn200 Tuning-less level setting { 6.3.2
Fn201 Advanced autotuning { 6.4.2
Fn202 Advanced autotuning by reference { 6.5.2
Fn203 One-parameter tuning { 6.6.2
Fn204 Anti-resonance control adjustment function { 6.7.2
Fn205 Vibration suppression function { 6.7.2
Fn206 EasyFFT { 7.21
Fn207 Online vibration monitor { 7.22
Blinks for one second