YASKAWA Sigma-V Series User Manual

7 Utility Functions (Fn)
7-20
9
Press the UP or DOWN Key to adjust the offset amount.
Carefully adjust the offset amount while monitoring the
torque reference monitor signal.
Adjustable range: -512 to
+511
10
Press the DATA/SHIFT Key for approximately one second.
"Cu2-o" is displayed, and then "Fn00F" is displayed again.
Step
Display after
Operation
Keys Operation
MODE / SET DATA /
MODE
/
SET DATA
/

YASKAWA Sigma-V Series Specifications

General

Brand	YASKAWA
Model	Sigma-V Series
Category	Servo Drives
Language	English