Yealink T29G Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
90
Parameter
Permitted Values
Default
When X=13, the default value is 0 (NA).
When X=14, the default value is 2 (Forward).
For SIP-T23P/T23G/T21(P) E2 IP phones:
When X=1, the default value is 28 (History).
When X=2, the default value is 61 (Directory).
When X=3, the default value is 5 (DND).
When X=4, the default value is 30 (Menu).
When X=5, the default value is 28 (History).
When X=6, the default value is 61 (Directory).
When X=7, the default value is 51 (Switch Account Up).
When X=8, the default value is 52 (Switch Account Down).
When X=9, the default value is 33 (Status).
When X=10, the default value is 0 (NA).
When X=14, the default value is 2 (Forward).
Web User Interface:
DSSKey->Line Key/ Programable Key->Type
Phone User Interface:
Menu->Features->DSS Keys->Line Keys X->Type
To configure phone lock via web user interface:
1. Click on Features->Phone Lock.
2. Select the desired value from the pull-down list of Phone Lock Enable.
3. Select the desired type from the pull-down list of Phone Lock Type.
4. Enter the unlock PIN in the Phone Unlock PIN (0~15 Digit) field.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)