Yealink T29G Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
80
The default HTTPS port number is 443.
6. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
7. Click OK to reboot the phone.
To configure web server type via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type.
2. Press or , or the Switch soft key to select the desired value from the HTTP
Status field.
3. Enter the HTTP port number in the HTTP Port field.
4. Press or , or the Switch soft key to select the desired value from the HTTP
Status field.
5. Enter the HTTPS port number in the HTTPS Port field.
6. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
Some menu options are protected by two privilege levels, user and administrator, each
with its own password. When logging into the web user interface, you need to enter the
user name and password to access various menu options.
A user or an administrator can change the user password. The default user password is
“user”. For security reasons, the user or administrator should change the default user

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)