Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
26
Web User Interface
Configuration Files
An administrator or a user can configure and use IP phones via phone user interface.
Access to specific features is restricted to the administrator. The default password is
“admin“(case-sensitive). Not all features are available on phone user interface. For
more information, refer to Yealink phone-specific user guide, available online:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
An administrator or a user can configure IP phones via web user interface. The default
user name and password for the administrator to log into the web user interface are
both “admin” (case-sensitive). Most features are available for configuring via web user
interface. IP phones support both HTTP and HTTPS protocols for accessing the web user
interface. For more information, refer to Web Server Type on page 77.
An administrator can deploy and maintain a mass of IP phones using configuration files.
The configuration files consist of:
Common CFG file
MAC-Oriented CFG file
MAC-local CFG file
Common CFG file
A Common CFG file contains parameters that affect the basic operation of the IP phone,
such as language and volume. It will be effectual for all IP phones of the same model.
The common CFG file has a fixed name for each IP phone model.The name of the
Common CFG file for each IP phone model is:
SIP-T48G: y000000000035.cfg
SIP-T46G: y000000000028.cfg
SIP-T42G: y000000000029.cfg
SIP-T41P: y000000000036.cfg
SIP-T29G: y000000000046.cfg
SIP-T27P: y000000000045.cfg
SIP-T23P/G: y000000000044.cfg
To Next Page
Loading...
Need help?
General
