Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
276
http://<phoneIPAddress>/servlet
?p=dsskey&q=load&model=0
Phone User Interface
Assign an intercom key.
Intercom Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring
DSS Key on page 549.
Parameters
Permitted Values
Default
linekey.X.type
14
Refer to the following
content
Description:
Configures a DSS key as an intercom key.
The digit 14 stands for the key type Intercom.
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T23P/G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:
linekey.1.type = 14
Default:
For SIP-T48G IP phones:
The default value of the line key 1-16 is 15, and the default value of the line key 17-29
is 0.
For SIP-T46G/T29G IP phones:
The default value of the line key 1-16 is 15, and the default value of the line key 17-27
is 0.
For SIP-T42G IP phones:
The default value of the line key 1-12 is 15, and the default value of the line key 13-15
is 0.
For SIP-T41P IP phones:
The default value of the line key 1-6 is 15, and the default value of the line key 7-15 is
0.
For SIP-T27P IP phones:
The default value of the line key 1-6 is 15, and the default value of the line key 7-21 is