Configuring Advanced Features
341
5. Enter the desired voice number in the Voice Mail field.
6. Click Confirm to accept the change.
To configure the presentation of audio and visual MWI via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select the desired value from the pull-down list of Voice Mail Display.
5. Click Confirm to accept the change.
Multicast paging allows IP phones to send/receive Real-time Transport Protocol (RTP)
streams to/from the pre-configured multicast address(es) without involving SIP signaling.
Up to 10 listening multicast addresses can be specified on the IP phone.
To Next Page
Loading...
