Yealink T29G

Configuring Advanced Features
449
4. Click Confirm to accept the change.
To configure NAT traversal and STUN server via web user interface:
1. Click on Network->Advanced.
2. In the NAT block, select the desired value from the pull-down list of Active.
3. Enter the IP address or the domain name of the STUN server in the STUN Server
field.
4. Enter the port of the STUN server in the Port field.
5. Click Confirm to accept the change.
To configure NAT traversal and STUN server via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->NAT->NAT Status.
2. Press or , or the Switch soft key to select the desired value from the NAT
Status field.
3. Enter the IP address or the domain name of the STUN server in the STUN Server
field.
4. Enter the port of the STUN server in the Port field.
5. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
IEEE 802.1X authentication is an IEEE standard for Port-based Network Access Control
(PNAC), part of the IEEE 802.1 group of networking protocols. It offers an authentication