Yealink T29G

Configuring Basic Features
253
entity="sip:1009@10.3.5.199">
<dialog id="23" call-id="0_3397097402@10.2.20.10" local-tag="16163367" remote-tag="282082771"
direction="initiator">
<state>early</state>
<local>
<identity>sip:1009@10.3.5.199</identity>
<target uri="sip:1009@10.3.5.199">
</local>
<remote>
<identity>sip:1008@10.3.5.199:5060</identity>
<target uri="sip:1008@10.3.5.199:5060">
</remote>
</dialog>
</dialog-info>
Procedure
Dialog info call pickup can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure dialog info call pickup.
Parameter:
account.X.dialoginfo_callpickup
Local
Web User Interface
Configure dialog-info call pickup on
the IP phone.
Navigate to:
http://<phoneIPAddress>/servlet?p=
account-adv&q=load&acc=0
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
account.X.dialoginfo_callpickup
0 or 1
0
Description:
Enables or disables the IP phone to pick up a call according to the SIP header of
dialog-info for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), call pickup is implemented through SIP signals.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G).
X ranges from 1 to 12 (for SIP-T42G).