Configuring Advanced Features
313
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
To configure an LDAP key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select LDAP from the Key Type field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Press the Save soft key to accept the change.
Busy Lamp Field (BLF) is used to monitor a specific user for status changes on IP phones.
For example, you can configure a BLF key on a supervisor’s phone to monitor the IP
phone user status (busy or idle). When the monitored user places a call, a busy indicator
on the supervisor’s phone indicates that the user’s phone is in use.
When the monitored user is idle, the supervisor can press the BLF key to dial out the
phone number. When the monitored user receives an incoming call, the supervisor can
press the BLF key to pick up the call directly. When the monitored user is in a call, the
supervisor can press the BLF key to interrupt and set up a conference call.
Visual Alert and Audio Alert for BLF Pickup
Visual and audio alert for BLF pickup allow the supervisor’s phone to play an alert tone
and display a visual prompt (e.g., “6001<-6002”, 6001 is the monitored extension which
receives an incoming call from 6002) when the monitored user receives an incoming call.
In addition to the BLF key, visual alert for BLF pickup feature enables the supervisor to
pick up the monitored user’s incoming call by pressing the DPickup soft key. The
directed call pickup code must be configured in advance. For more information on how
to configure the directed call pickup code for the Pickup soft key, refer to Directed Call
Pickup on page 235.
To Next Page
Loading...
Need help?
General
