Yealink T29G Administrator's Guide

Configuring Advanced Features
381
Parameters
Permitted Values
Default
action_url.setup_autop_finish
URL within 511 characters
Blank
Description:
Configures the action URL the IP phone sends when completing auto provisioning
via power on.
Example:
action_url.setup_autop_finish = http://192.168.0.20/help.xml?IP=$ip
Web User Interface:
Features->Action URL->Autop Finish
Phone User Interface:
None
To configure action URL via web user interface:
1. Click on Features->Action URL.
2. Enter the action URLs in the corresponding fields.
3. Click Confirm to accept the change.
Opposite to action URL, action URI allows IP phones to interact with web server
application by receiving and handling an HTTP or HTTPS GET request. When receiving a
GET request, the IP phone will perform the specified action and respond with a 200 OK

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)