Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
264
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select the desired value from the pull-down list of the Caller ID Source.
5. Click Confirm to accept the change.
Connected Line Identification Presentation (COLP) allows IP phones to display the
identity of the connected party specified for outgoing calls. IP phones can display the
Dialed Digits, or the identity in a SIP header (Remote-Party-ID or P-Asserted-Identity)
received, or the identity in the From header carried in the UPDATE message sent by the
callee as described in RFC 4916. Connected line identification presentation is also
known as Called line identification presentation. In some cases, the remote party will be
different from the called line identification presentation due to call diversion.
If the callee already exists in the local directory, the local contact name assigned to the
callee should be preferentially displayed.
For more information on connected line identification presentation, refer to Calling and
Connected Line Identification Presentation on Yealink IP Phones , available online:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
Procedure
COLP can be configured only using the configuration files.
Configuration File
<MAC>.cfg
Configure the presentation of
the callee’s identity.
Parameter:
account.X.cp_source