Yealink T29G Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
474
Parameter
Permitted Values
Default
headset mode. The headset mode will not be deactivated until the user presses the
HEADSET key again.
Web User Interface:
Features->General Information->Headset Prior
Phone User Interface:
None
To configure headset prior via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
Dual headset allows users to use two headsets on one IP phone. To use this feature,
users need to physically connect two headsets to the headset and handset jacks
respectively. Once the IP phone connects to a call, the user with the headset connected
to the headset jack has full-duplex capabilities, while the user with the headset
connected to the handset jack is only able to listen.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)