Yealink T29G Administrator's Guide

Configuring Basic Features
165
5. (Optional.) Enter the call waiting off code in the Off Code field.
6. Press the Save soft key to accept the change.
Auto redial allows IP phones to redial a busy number after the first attempt. Both the
number of attempts and waiting time between redials are configurable.
Procedure
Auto redial can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure auto redial feature.
Parameters:
auto_redial.enable
auto_redial.interval
auto_redial.times
Local
Web User Interface
Configure auto redial feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Phone User Interface
Configure auto redial feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
auto_redial.enable
0 or 1
0
Description:
Enables or disables the IP phone to automatically redial the dialed number when the
callee is temporarily unavailable.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will dial the previous dialed out number
automatically when the dialed number is temporarily unavailable.
Web User Interface:
Features->General Information->Auto Redial
Phone User Interface:
Menu->Features->Auto Redial->Auto Redial

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)