Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
180
4. Select the desired value from the pull-down list of Local Anonymous Rejection.
5. Select the desired value from the pull-down list of Send Anonymous Rejection
code.
6. (Optional.) Enter the Send Anonymous Rejection on code in the On Code field.
7. (Optional.) Enter the Send Anonymous Rejection off code in the Off Code field.
8. Click Confirm to accept the change.
To configure anonymous call rejection via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press or , or the Switch soft key to select the desired line from the Line ID
field.
3. Press or to scroll to the Anonymous Rejection field.
4. Press or to select Enabled from the Anonymous Rejection field.
5. Press or to scroll to the Send Rejection Code field.
6. (Optional.) Press or to select the desired value from the Send Rejection
Code field.
7. (Optional.) Enter the anonymous call rejection on code and off code respectively in
the Reject On Code and Reject Off Code field.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
Do Not Disturb (DND) allows IP phones to ignore incoming calls. DND feature can be
configured on a phone or a per-line basis depending on the DND mode. Two DND
modes:
Phone (default): DND feature is effective for the IP phone.
Custom: DND feature can be configured for each or all accounts.
To Next Page
Loading...
Need help?
General
