Yealink T29G

Configuring Advanced Features
329
8. Click Confirm to accept the change.
To configure BLF List keys manually via web user interface:
1. Click on DSSKey->Line Key (or Programable Key).
2. In the desired DSS key field, select BLF List from the pull-down list of Type.
3. Repeat step 2-3, configure more BLF list keys.
4. Click Confirm to accept the change.
Hide Features Access Code feature enables the IP phone to display the feature
identifier instead of the dialed feature access code automatically. For example, the
dialed call park code will be replaced by the identifier “Call Park” when you park an
active call.
The hide feature access codes feature is applicable to the following features:
 Voice Mail
 Pick up
 Group Pick up
 Barge In
 Retrieve
 Call Park
 Group Park
Procedure
The hide feature access codes feature can be configured using the configuration files or
locally.
Configuration File
<y0000000000xx>.cfg
Configure the hide feature
access codes feature:
Parameters:
features.hide_feature_access_co
des.enable